2023 Alumaweld Free Drifter 20 ft.
Depending on where you're from it may be called, "free drifting", "side-drifting", "dragging", "rolling shot" or "boon-dogging". These techniques that require critical boat control, perfect balance and a boat that responds immediately to your commands. The 6° whitewater bottom vee married to Alumaweld's exclusive performance Path Lifting Strakes™ enable the Free Drifter to drift into shallow tailouts and plane quickly with minimal bow rise. Wide tackle trays are perfect for storing rods. The forward fuel tank position enhances the Free Drifter's balance which is essential for proper control and the open design allows complete freedom of movement for casting. Call it what you like, but free-drifting is here to stay and has exploded in popularity. Alumaweld worked closely with some of the top experts in the field to create the ultimate ride for the application. The response? A tailored design and new series appropriately named, the Free Drifter.
SPECIFICATIONS | |
---|---|
20' | |
Hull Center Length | 20' 1" |
Beam | 84" |
Beam At Chine | 66" |
Inside Freeboard | 24" |
Side Height | 28" |
Transom Height | 27.5" |
Deadrise | 6° W/SHOE |
Bottom Thickness | .160 |
Side Thickness | .125 |
Transom Thickness | .160 |
Approx. Weight | 1,270# |
Persons / Capacity | 5/750# |
Weight Capacity | 1,500# |
Fuel Capacity | 37 GAL |
Max Hp Prop/Jet (Remote) | 115/80 |
Max Hp Prop/Jet (Tiller) | 75/80 |
PRODUCT HIGHLIGHTS
Best Buy! Best Value!
- HEAVY DUTY .160 bottom and .125 sidewall thickness
- Prop or jet power…you choose!
- Engineered chine & bottom design assures dry ride
- Wide, deep, stable, secure
- Generous storage features
-
Above floor fuel tank with gauge
-
Aluminum transom door(s) with floor drains
-
Armor Tech™ premium floorboards with Dura Tuff™ non-skid vinyl covering
-
Continuously welded box girder construction
- Depth Finder Box (port/stbd)
-
Electric bilge pump
-
Exclusive lifetime warranty
-
Extended step deck with storage and fish box
-
Five switch panel with fuses, dual USB port, and 12-volt outlet
- Foredeck storage locker with locking door
-
Four lifting / turning strakes
-
Four weld-on gunnel cleats located under coaming
-
Full coaming
-
Full length storage trays
-
Rod grippers
-
Running lights
-
Slotted chine and gunnel extrusions
-
Straight transom
-
Two bolt-on transducer brackets
-
Two folding seats on aluminum boxes
-
U.S. Coast Guard approved flotation (18')
-
Under floor protective coating
-
Vinyl graphics
-
Weld-on cast aluminum stern eyes
-
Weld-on cleat on inner foredeck
-
Weld-on double bow eye
-
Wide transom tray
-
Zolatone interior
Power
- Outboard/Tiller Pre-Rigging
- Outboard Installation
- 20" Saddle Cut Transom
Accent
- Full Outside Paint - Two Stage Paint
- Two Tone Outside Paint
- Interior Clear Coat Over Zolatone™
Accessories
- Zinc Anode
- Diamond Plate Foredeck, Aft Gunnel Caps and Step Pad on Fuel Tank
- Single Battery Tray In Bow Storage
- Power Cable To Bow W/Transom Lugs
- Hot Tub (8 x 8) (n/a on 18')
- Hand Rail Gunnel w/Rubber
- Gunnel Rubber
- Live Well In Step Deck
- Center Console With Lockable Storage & Mechanical Steering 16" x 36"
- Sliding Aluminum Windshield, 16" Console
- Washdown Pump Assembly
Canvas / Upholstery
- Folding Seat On Aluminum Box
- Folding Seat On Four-Legged Base
Rogue™ Trailer / Trailer Options
- Rogue™ Galvanized Single Axle Trailer
- Spare Tire And Wheel
- Disc Brakes
- Diamond Plate Fender Steps
- Swing Tongue
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.